[LCML] FJ60 Carb Question

[Landcruiser Specialties]

Correct...A/C idle up adjusting screw.

Thank you,
Tim
Landcruiser Specialties
15055 S. Loder Rd. A2
Oregon City, OR. USA. 97045
(503) 518-1656
www.landcruiserspecialties.com



  AFAIK, its the AC idle up. I'll go out and look at mine tomorrow morning. When you turn the ac on, the idle should go up to about 1300 rpm's. When its running with the ac on, look at that screw again.

  Johnny C

  On May 26, 2011 12:46 AM, "Doug Graham" <lovetoskifast at gmail.com> wrote:
  > Pretty sure Jim C knows...and it's prolly buried somewhere in one of the
  > demog threads on IH8MUD...but I'll take a guess anyway that it's the idle-up
  > adj for AC?
  > 
  > On Wed, May 25, 2011 at 6:53 PM, Jeff Zepp <jeffzepp at earthlink.net> wrote:
  > 
  >> Since getting our new-to-us FJ60 through smog and taking a REALLY close
  >> look at all that crazy stuff on a fully smogged 60 I noticed this screw. It
  >> looks like it might be an idle adjustment type thing. It isn't mentioned
  >> anywhere in the manuals and the rod it pivots on is the primary throttle
  >> rod. The photo is with the engine off and throttle closed. This is the front
  >> of the carb.
  >>
  >>
  >> http://risingsun4x4club.org/forum2/attachment.php?attachmentid=23780&stc=1&d=1306374473
  >>
  >> What the heck is this guy for? Balancing the idle adjustment with the
  >> regular idle adjustment screw at the rear of the carb? I can not find any
  >> reference to this in any of my manuals.
  >>
  >> TIA!
  >>
  >> Jeff Zepp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://tlca.org/pipermail/lcml_tlca.org/attachments/20110526/0082ebf4/attachment.html>