[LCML] Chromoly rear axle shafts?

[charles stewart]

Message: 2
Date: Fri, 29 Apr 2011 10:01:41 -0700
From: Kyle Moosmann <kmoosmann at vitalsmarts.com>
To: "lcml at tlca.org" <lcml at tlca.org>
Subject: [LCML] Chromoly rear axle shafts?
Message-ID:
    <F70A2BDB65BF834F8417017CB454D0081F0F95E7EC at VA3DIAXVS271.RED001.local>
Content-Type: text/plain; charset="us-ascii"

I am looking for a set of chromoly rear axle shafts for a 40 ff axle.

Have you called Sandy Cone @ www.coneindustries.com ? What he'd prolly do is 
spline a shaft, at both ends, & make you a drive plate. If he doesn't do it, 
call Dutchman, Moser, Mark Williams or Summers Bros. If they're not familiar w/ 
LC axle shafts, you may need to send them a spider gear so they can cut the 
correct pressure angle. HTH!

Chuck Stewart
TLCA #3343
Georgia Cruisers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://tlca.org/pipermail/lcml_tlca.org/attachments/20110430/2a0d41f5/attachment.html>