[LCML] Auto Transmission in US-market FJ62 - Kickdown cable.

[alan wesley]

Thanks Mark!

----------------------------------------------------------------------
Mark E Whatley <cruiser at mtaonline.net> wrote:
 
 Adjust it at the throttle body. It is right beside the throttle cable. 
I just take any slack out, but be sure not to preload it. Too much slack 
and the tranny will not downshift readily. This is a common cause of 
complaints of sluggish performance in the '62s and (FJ)80s. Too tight 
and the tranny will shift hard. Especially on partial throttle lets offs 
when it upshifts as you decrease the load on the engine.
 
 
Mark...
 
--------------------------------------------------------------
alan wesley wrote:

> Hi All:
>
> Thanks for your response Mark!
>
> Can you explain a bit more in detail this /kickdown cable?   /Like, 
> where it attaches to the transmission, how one adjusts it, etc.
> /
> /Regards,
>
> Alan



 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://tlca.org/pipermail/lcml_tlca.org/attachments/20100822/b69bdfdb/attachment.html>